Please contact or Mt Xia for assistance with all your shell programming needs.

  • 1. BOURNESHELL OVERVIEW Go to the bottom, first,previous,next, last section, table of contents.
    1.  BOURNESHELL OVERVIEW
    


The BourneShell is both a command-line interpreter and a high-
level programming language.  When it is acting as a command-line
interpreter, it processes commands as you enter them at the command
prompt.  When you use it as a programming language, it processes
commands that are stored in files known as BourneShell scripts. 
This course will show you how to create and execute BourneShell
scripts.  We will explore BourneShell programming including such
features as variables, control structures, processes, and
executable files.


The BourneShell is one of three shells available on most UNIX
systems.  Bourne is the accepted standard for System V UNIX.  The
other shells are being used more and more.  The other shells are
the CShell and the KornShell.  The CShell is BSD (Berkeley Software
Distribution) UNIX. BSD was developed at the University of
California at Berkeley, California. Most of the features found in
the BourneShell are also found in the other shells; there are
differences, however.  The CShell and KornShell are not standard
on UNIX System V but are generally available.


BourneShell scripts allow you to group command lines together and
execute them by entering a single command at the command line. This
allows complex functions to be completed by any user, and
repetitive functions can be completed easily.  Input and output
can also be redirected from a BourneShell script.


    1.1  What is the BourneShell?
    

BourneShell is a high level programming language and a command line
interpreter. 

The command to invoke the BourneShell is:


      Command Format:  sh [-acefhiknrstuvx] [args]                 
                                                               
  (See Appendix A for a complete list of options etc)

              

A Shell script is an executable plain file that contains UNIX and
shell commands. To execute the shell script type the name of the
script at the prompt. A simple shell script called shell_ex is
shown in the following example. The output from the execution of
the shell is also shown.

Sample Session:


 $cat shell_ex                                                 
 echo "This is a very simple shell procedure "                
 echo "created with the basic echo command "                   
 echo "and three other very basic commands "                   
 echo                                                          
 ps                                                            
 echo                                                          
 who                                                           
 echo                                                          
 ls                                                            
 $sh shell_ex                                                  
 This is a very simple shell procedure                         
 created with the very basic echo command                      
 and three other very basic commands                           
                                                               
 PID    TTY     TIME    COMMAND                                
 10443 rt02120  0:01    sh                                     
 10427 rt02120  0:04    ksh                                   
                                                               
 sgavlick  rt021e0   Sep 7   13:26                             
 teacher   rt021b0   Sep 7   14:39                             
                                                               
 memo                                                          
 class_notes                                                   
 $                                                             


    1.2  Making a Bourne Shell Script Executable
    

A BourneShell script is an ordinary file that contains commands
which can be executed in sequence by entering one command at the
BourneShell prompt.  In order for a script to be executed, it must
first be executable.  This is done with the chmod command.

Sample Session:


 $cat shell_ex                                                 
 echo "This is a very simple shell procedure "                 
 echo "created with the basic echo command "                   
 echo "and three other very basic commands "                   
 echo                                                          
 ps                                                            
 echo                                                          
 who                                                           
 echo                                                          
 ls                                                            
 $                                                             


If the ls -l shell_ex command were entered, we would see the
protections assigned to this file.

Sample Session:


 $ls -l shell_ex                                               
 -rw-r--r-- 1 teacher class  66 Sep 7 10:24 shell_ex           
 $                                                            

The character in column one is the type of file. 

      -  =  ordinary (plain) disk file

      d  =  directory

      b  =  block special file

      c  =  character special file

      p  =  fifo file ("named pipe") special file

      l  =  symbolic link

          



Notice that the script file in the previous sample session has the
following file protections:

     User   - Read and Write
     Group  - Read
     Other  - Read

No execute permissions have been granted for user, group, or other. 
If we try to execute this script by typing its name, the following
would result.

Sample Session:


 $shell_ex                                                     
 shell_ex: execute permission denied                           
 $                                                             


This error message would indicate that execute permission was
denied.  The BourneShell script could not be executed.  To change
the permissions for the BourneShell script, use the chmod command.

Sample Session:


 $chmod 755 shell_ex                                           
 $ls -l shell_ex                                               
 -rwxr-xr-x 1 teacher class  66 Sep 7  10:26 shell_ex          
 $                                                             



Now that the permissions have been changed to allow user, group,
and others to execute the file, it will execute properly.
Sample Session:


 $shell_ex                                                     
 This is a very simple shell procedure                         
 created with the basic echo command                           
 and three other very basic commands                           
                                                               
 PID    TTY     TIME    COMMAND                                
 10443 rt02120  0:01    sh                                     
 10427 rt02120  0:04    ksh                                    
                                                               
 sgavlick  rt021e0   Sep 7   13:26                             
. teacher   rt021b0   Sep 7   14:39                             
.                                                               
.                                                               


The protections will work as you expect.  Execute permission for
the user will allow you (the owner) to run the BourneShell script.
Group permissions allow anyone in your group to execute the script,
and other permission allows anyone on the system to execute the
script.

    1.3  Tracing Mechanisms
    

It is possible to have a trace made of the BourneShell script as
it executes. This is invaluable for debugging purposes. All that
is required is to give an option to the BourneShell.   This is done
by including an option on the call to "sh". The command to do this
is:


         Command Format: sh [-acefhiknrstuvx] [args]               
                                                               
     See Appendix A for a complete list of options etc        

                                                                   


The option to turn on tracing is -x. For an example, let's trace
the execution of the simple script shell_ex.

Sample session:


     $cat shell_ex                                   
     echo "This is a very simple shell procedure "     
     echo "created with the basic echo command "        
     echo "and three other very basic commands "               
     echo                                              
     ps                                                        
     echo                                                      
     who                                                       
     echo                                                      
     ls                                                        
     $                                                         


Execute the BourneShell script using the -x option on the call to
the shell. The following sample session shows how to do this and
it shows the results of the trace.
Sample session:


     $sh -x shell_ex                                           
     + echo This is a very simple shell procedure              
     This is a very simple shell procedure                     
     + echo created with the basic echo command                
     created with the basic echo command                       
     + echo and three other very basic commands                
     and three other very basic commands                       
     + echo                                                    
                                                               
     + ps                                                      
     PID    TTY      TIME       COMMAND                        
     10443 rt01120   0:01       sh                             
     10427 rt02120   0:04       ksh                            
     + echo                                                    
                                                               
     + who                                                     
     sgavlick  rt021e0   Sep 7  13:26                          
     teacher   rt02120   Sep 7  14:39                          
     + echo                                                    
                                                               
     + ls                                                      
     memo                                                      
     class_notes                                               
     $                                                         

The commands as read from the BourneShell script are indicated by
the plus sign (+). The next line or lines are the results of the
execution of the command. Using this tracing option allows you to
se the execution of each command in the script and see the results
of that execution.


    

    Workshop 1
    

This workshop will reinforce your understanding of the ideas
presented in Chapter 1. Each student is to complete the entire
workshop.

DESK EXERCISES 


     1.   The BourneShell can act as a command line

                                                   

          or a high level                          .  




     2.   The BourneShell is one of three shells generally
          available. What are the other two?




     3.   One advantage of using a shell script is

                                                  .



     4.   The command to call the BourneShell is:

          a.   bourne
          b.   ksh
          c.    b
          d.   sh




     5.   Why would you use tracing?






     6.   What UNIX command do you enter to make a BourneShell
          script executable? 


     That's all
    Go to the top, first,previous,next, last section, table of contents.