|
The following are the AIX Systems Management Interface Tool screens
associated with the setup and configuration of MQSeries in an HACMP
environment. These instructions assume there is a volume group called
"<Machine Identifier>datavg" which exists on a shared external
disk array. The "<Machine Identifier>" portion of the volume group
name is a string of characters which uniquely identifies the machine
with which the volume group is normally associated. As an example, this
document describes a two machine, mutual failover cluster using machine
names of "mtxeai01" and "mtxeai02".
The volume group, logical volume and file system naming standards
used in this document conform to the standardized methodology detailed
in the document titled "Filesystem Naming".
$ smit hacmp
--> Cluster Configuration
--> Cluster Topology
--> Configure Cluster
--> Change / Show Cluster Definition
Change / Show Cluster Definition
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
**NOTE: Cluster Manager MUST BE RESTARTED
in order for changes to be acknowledged.**
* Cluster ID [11870312]
* Cluster Name [eai00]
$ smit hacmp
--> Cluster Configuration
--> Cluster Topology
--> Configure Nodes
--> mtxeai02
Change/Show a Cluster Node
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
* Node Name mtxeai02
* New Node Name []
$ smit hacmp
--> Cluster Configuration
--> Cluster Topology
--> Configure Nodes
--> mtxeai01
Change/Show a Cluster Node
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
* Node Name mtxeai01
* New Node Name []
$ smit hacmp
--> Cluster Configuration
--> Cluster Topology
--> Configure Adapters
--> Change / Show an Adapter
--> mtxeai02
Change/Show an Adapter
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
* Adapter IP Label mtxeai02
New Adapter Label []
Network Type [ether]
Network Name [ether]
Network Attribute public
Adapter Function service
Adapter Identifier [10.4.192.39]
Adapter Hardware Address []
Node Name [mtxeai02]
$ smit hacmp
--> Cluster Configuration
--> Cluster Topology
--> Configure Adapters
--> Change / Show an Adapter
--> mtxeai02boot
Change/Show an Adapter
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
* Adapter IP Label mtxeai02boot
New Adapter Label []
Network Type [ether]
Network Name [ether]
Network Attribute public
Adapter Function boot
Adapter Identifier [10.4.192.37]
Adapter Hardware Address []
Node Name [mtxeai02]
$ smit hacmp
--> Cluster Configuration
--> Cluster Topology
--> Configure Adapters
--> Change / Show an Adapter
--> mtxeai02by
Change/Show an Adapter
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
* Adapter IP Label mtxeai02by
New Adapter Label []
Network Type [ether]
Network Name [ether]
Network Attribute public
Adapter Function standby
Adapter Identifier [10.4.194.37]
Adapter Hardware Address []
Node Name [mtxeai02]
$ smit hacmp
--> Cluster Configuration
--> Cluster Topology
--> Configure Adapters
--> Change / Show an Adapter
--> mtxeai02tty
Change/Show an Adapter
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
* Adapter IP Label mtxeai02tty
New Adapter Label []
Network Type [rs232]
Network Name [serial1]
Network Attribute serial
Adapter Function service
Adapter Identifier [/dev/tty3]
Adapter Hardware Address []
Node Name [mtxeai02]
$ smit hacmp
--> Cluster Configuration
--> Cluster Topology
--> Configure Adapters
--> Change / Show an Adapter
--> mtxeai01
Change/Show an Adapter
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
* Adapter IP Label mtxeai01
New Adapter Label []
Network Type [ether]
Network Name [ether]
Network Attribute public
Adapter Function service
Adapter Identifier [10.4.192.38]
Adapter Hardware Address []
Node Name [mtxeai01]
$ smit hacmp
--> Cluster Configuration
--> Cluster Topology
--> Configure Adapters
--> Change / Show an Adapter
--> mtxeai01boot
Change/Show an Adapter
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
* Adapter IP Label mtxeai01boot
New Adapter Label []
Network Type [ether]
Network Name [ether]
Network Attribute public
Adapter Function boot
Adapter Identifier [10.4.192.36]
Adapter Hardware Address []
Node Name [mtxeai01]
$ smit hacmp
--> Cluster Configuration
--> Cluster Topology
--> Configure Adapters
--> Change / Show an Adapter
--> mtxeai01by
Change/Show an Adapter
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
* Adapter IP Label mtxeai01by
New Adapter Label []
Network Type [ether]
Network Name [ether]
Network Attribute public
Adapter Function standby
Adapter Identifier [10.4.194.36]
Adapter Hardware Address []
Node Name [mtxeai01]
$ smit hacmp
--> Cluster Configuration
--> Cluster Topology
--> Configure Adapters
--> Change / Show an Adapter
--> mtxeai01tty
Change/Show an Adapter
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
* Adapter IP Label mtxeai01tty
New Adapter Label []
Network Type [rs232]
Network Name [serial1]
Network Attribute serial
Adapter Function service
Adapter Identifier [/dev/tty3]
Adapter Hardware Address []
Node Name [mtxeai01]
$ smit hacmp
--> Cluster Configuration
--> Cluster Security
--> Change / Show an Cluster Security
Change / Show Cluster Security
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[TOP] [Entry Fields]
* Cluster Security Mode Standard
WARNING: The /.rhosts file must be removed
from ALL nodes in the cluster when the
security mode is set to 'Enhanced'.
Failure to remove this file makes it
possible for the authentication server
to become compromised. Once the server
has been compromised, all authentication
passwords must be changed.
Changes to the cluster security mode
setting alter the cluster topology
configuration, and therefore need to be
synchronized across cluster nodes. Since
cluster security mode changes are seen as
topology changes, they cannot be performed
along with dynamic cluster resource
reconfigurations.
[BOTTOM]
$ smit hacmp
--> Cluster Configuration
--> Cluster Resources
--> Define Resource Groups
--> Change / Show a Resource Group
--> eai00_2_rg1
Change/Show a Resource Group
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
Resource Group Name eai00_2_rg1
New Resource Group Name []
Node Relationship cascading
Participating Node Names [mtxeai02 mtxeai01]
$ smit hacmp
--> Cluster Configuration
--> Cluster Resources
--> Define Resource Groups
--> Change / Show a Resource Group
--> eai00_1_rg1
Change/Show a Resource Group
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
Resource Group Name eai00_1_rg1
New Resource Group Name []
Node Relationship cascading
Participating Node Names [mtxeai01 mtxeai02]
$ smit hacmp
--> Cluster Configuration
--> Cluster Resources
--> Define Application Servers
--> Change / Show an Application Server
--> mqseries2_app1
Change / Show an Application Server
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
Server Name mqseries2_app1
New Server Name [mqseries2_app1]
Start Script [/home/bin/mqseries2_start.ksh]
Stop Script [/home/bin/mqseries2_stop.ksh]
$ smit hacmp
--> Cluster Configuration
--> Cluster Resources
--> Define Application Servers
--> Change / Show an Application Server
--> mqseries1_app1
Change / Show an Application Server
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
Server Name mqseries1_app1
New Server Name [mqseries1_app1]
Start Script [/home/bin/mqseries1_start.ksh]
Stop Script [/home/bin/mqseries1_stop.ksh]
$ smit hacmp
--> Cluster Configuration
--> Cluster Resources
--> Change / Show Resources / Attributes for a Resource Group
--> eai00_2_rg1
Change/Show Resources/Attributes for a Resource Group
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[TOP] [Entry Fields]
Resource Group Name eai00_2_rg1
Node Relationship cascading
Participating Node Names mtxeai02 mtxeai01
Service IP label [mtxeai02]
Filesystems [/mtxeai02/home
/mtxeai02/ibm/mqm/YYEAIAIX/data
/mtxeai02/ibm/mqm/YYEAIAIX/log
/mtxeai02/mercator]
Filesystems Consistency Check fsck
Filesystems Recovery Method sequential
Filesystems/Directories to Export []
Filesystems/Directories to NFS mount []
Network For NFS Mount []
Volume Groups [eai02datavg]
Concurrent Volume groups []
Raw Disk PVIDs []
Connections Services []
Fast Connect Services []
Application Servers [mqseries2_app1]
Highly Available Communication Links []
Miscellaneous Data []
Inactive Takeover Activated false
Cascading Without Fallback Enabled false
9333 Disk Fencing Activated false
SSA Disk Fencing Activated false
Filesystems mounted before IP configured true
[BOTTOM]
$ smit hacmp
--> Cluster Configuration
--> Cluster Resources
--> Change / Show Resources / Attributes for a Resource Group
--> eai00_1_rg1
Change/Show Resources/Attributes for a Resource Group
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[TOP] [Entry Fields]
Resource Group Name eai00_1_rg1
Node Relationship cascading
Participating Node Names mtxeai01 mtxeai02
Service IP label [mtxeai01]
Filesystems [/mtxeai01/home
/mtxeai01/ibm/mqm/P2EAIAIX/data
/mtxeai01/ibm/mqm/P2EAIAIX/log
/mtxeai01/ibm/mqm/XXEAIAIX/data
/mtxeai01/ibm/mqm/XXEAIAIX/log
/mtxeai01/mercator]
Filesystems Consistency Check fsck
Filesystems Recovery Method sequential
Filesystems/Directories to Export []
Filesystems/Directories to NFS mount []
Network For NFS Mount []
Volume Groups [eai01datavg]
Concurrent Volume groups []
Raw Disk PVIDs []
Connections Services []
Fast Connect Services []
Application Servers [mqseries1_app1]
Highly Available Communication Links []
Miscellaneous Data []
Inactive Takeover Activated false
Cascading Without Fallback Enabled false
9333 Disk Fencing Activated false
SSA Disk Fencing Activated false
Filesystems mounted before IP configured true
[BOTTOM]
$ smit hacmp
--> Cluster Configuration
--> Cluster Resources
--> Change / Show Run Time Parameters
--> mtxeai02
Change/Show Run Time Parameters
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
Node Name mtxeai02
Debug Level high
Host uses NIS or Name Server true
$ smit hacmp
--> Cluster Configuration
--> Cluster Resources
--> Change / Show Run Time Parameters
--> mtxeai01
Change/Show Run Time Parameters
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
Node Name mtxeai01
Debug Level high
Host uses NIS or Name Server true
$ smit hacmp
--> Cluster Configuration
--> Cluster Resources
--> Change / Show Cluster Lock Manager Resource Allocation
Change/Show Cluster Lock Manager Resource Allocation
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
* Lock Tuning Statistic Recalculation Rate [9999999]
* Lock Tuning Statistic Decay Rate [0.875]
$ smit hacmp
--> Cluster Configuration
--> Cluster Resources
--> Show Cluster Resources
--> Show Resource Information by Node
--> mtxeai02
COMMAND STATUS
Command: OK stdout: yes stderr: no
Before command completion, additional instructions may appear below.
[TOP]
Resource Group Name eai00_1_rg1
Node Relationship cascading
Participating Node Name(s) mtxeai01 mtxeai02
Service IP Label mtxeai01
Filesystems /mtxeai02/home
/mtxeai02/ibm/mqm/P2EAIAIX/DATA
/mtxeai02/ibm/mqm/P2EAIAIX/log
/mtxeai02/ibm/mqm/XXEAIAIX/data
/mtxeai02/ibm/mqm/XXEAIAIX/log
/mtxeai02/mercator
Filesystems Consistency Check fsck
Filesystems Recovery Method sequential
Filesystems/Directories to be exported
Filesystems to be NFS mounted
Network For NFS Mount
Volume Groups eai02datavg
Concurrent Volume Groups
Disks
Shared Tape Resources
Connections Services
Fast Connect Services
Application Servers mqseries1_app1
Highly Available Communication Links
Miscellaneous Data
Inactive Takeover false
Cascading Without Fallback false
9333 Disk Fencing false
SSA Disk Fencing false
Filesystems mounted before IP configured true
Run Time Parameters:
Resource Group Name eai00_2_rg1
Node Relationship cascading
Participating Node Name(s) mtxeai02 mtxeai01
Service IP Label mtxeai02
Filesystems /mtxeai01/home
/mtxeai01/ibm/mqm/YYEAIAIX/data
/mtxeai01/ibm/mqm/YYEAIAIX/log
/mtxeai01/mercator
Filesystems Consistency Check fsck
Filesystems Recovery Method sequential
Filesystems/Directories to be exported
Filesystems to be NFS mounted
Network For NFS Mount
Volume Groups eai01datavg
Concurrent Volume Groups
Disks
Shared Tape Resources
Connections Services
Fast Connect Services
Application Servers mqseries2_app1
Highly Available Communication Links
Miscellaneous Data
Inactive Takeover false
Cascading Without Fallback false
9333 Disk Fencing false
SSA Disk Fencing false
Filesystems mounted before IP configured true
Run Time Parameters:
Node Name mtxeai02
Debug Level high
Host uses NIS or Name Server true
[BOTTOM]
$ smit hacmp
--> Cluster Configuration
--> Cluster Resources
--> Cluster Events
--> Show Cluster Resources
--> Show Resource Information by Node
--> mtxeai01
COMMAND STATUS
Command: OK stdout: yes stderr: no
Before command completion, additional instructions may appear below.
[TOP]
Resource Group Name eai00_1_rg1
Node Relationship cascading
Participating Node Name(s) mtxeai01 mtxeai02
Service IP Label mtxeai01
Filesystems /mtxeai01/home
/mtxeai01/ibm/mqm/P2EAIAIX/data
/mtxeai01/ibm/mqm/P2EAIAIX/log
/mtxeai01/ibm/mqm/XXEAIAIX/data
/mtxeai01/ibm/mqm/XXEAIAIX/log
/mtxeai01/mercator
Filesystems Consistency Check fsck
Filesystems Recovery Method sequential
Filesystems/Directories to be exported
Filesystems to be NFS mounted
Network For NFS Mount
Volume Groups eai02datavg
Concurrent Volume Groups
Disks
Shared Tape Resources
Connections Services
Fast Connect Services
Application Servers mqseries1_app1
Highly Available Communication Links
Miscellaneous Data
Inactive Takeover false
Cascading Without Fallback false
9333 Disk Fencing false
SSA Disk Fencing false
Filesystems mounted before IP configured true
Resource Group Name eai00_2_rg1
Node Relationship cascading
Participating Node Name(s) mtxeai02 mtxeai01
Service IP Label mtxeai02
Filesystems /mtxeai02/home
/mtxeai02/ibm/mqm/YYEAIAIX/data
/mtxeai02/ibm/mqm/YYEAIAIX/log
/mtxeai02/mercator
Filesystems Consistency Check fsck
Filesystems Recovery Method sequential
Filesystems/Directories to be exported
Filesystems to be NFS mounted
Network For NFS Mount
Volume Groups eai01datavg
Concurrent Volume Groups
Disks
Shared Tape Resources
Connections Services
Fast Connect Services
Application Servers mqseries2_app1
Highly Available Communication Links
Miscellaneous Data
Inactive Takeover false
Cascading Without Fallback false
9333 Disk Fencing false
SSA Disk Fencing false
Filesystems mounted before IP configured true
Run Time Parameters:
Node Name mtxeai01
Debug Level high
Host uses NIS or Name Server true
[BOTTOM]
|
