Tivoli Monitoring Agent Install for AIX

1. cd to /opt directory
2. execute the following command, mkdir –p /etc/tivoli/lcf
3. open an ftp session to mxdnim
4. cd to the /export/cdimages/TMA directory
5. get TEC.tar
6. close ftp session
7. execute the following command, tar –xvf TEC.tar
8. cd /opt/tivoli/lcf/dat/1
9. edit the last.cfg file and make sure that it looks like the following (pay close attention to the last three lines which are highlighted):

lcfd_port=9495

lcfd_preferred_port=9495

gateway_port=9494

log_threshold=1

start_timeout=120

run_timeout=120

logfile=/opt/tivoli/lcf/dat/1/lcfd.log

config_path=/opt/tivoli/lcf/dat/1/last.cfg

run_dir=/opt/tivoli/lcf/dat/1

load_dir=/opt/tivoli/lcf/bin/aix4-r1/mrt

lib_dir=/opt/tivoli/lcf/lib/aix4-r1

cache_loc=/opt/tivoli/lcf/dat/1/cache

cache_index=/opt/tivoli/lcf/dat/1/cache/Index.v5

cache_limit=20480000

log_queue_size=1024

log_size=1024000

udp_interval=300

udp_attempts=6

login_interval=1800

lcs.crypt_mode=196608

lcfd_alternate_port=9496

recvDataTimeout=2

recvDataNumAttempts=10

recvDataQMaxNum=50

lcs.login_interfaces=mxfmtxtmr01+9494

lcs.machine_name=hostname

local_ip_interface=IP address of host

10. execute the following command:

ln –s /opt/tivoli/lcf /etc/tivoli/lcf

11. execute the command /opt/tivoli/lcf/dat/1/lcfd.sh
12. execute the following command (do not forget the double quotes):

mkitab “tma:2:once:/opt/tivoli/lcf/dat/1/lcfd.sh > /dev/console 2>&1”

13. Open you web browser and enter in the following address:

http://hostname:9495

14. The status line should read as follows:

Version : 103
Interp : aix4-r1
Endpoint Label : hostname
Hostname : hostname
NIC Address : hostname.tu.com (146.61.68.76+9495)
Gateway Address : mxfmtxtiv03.tu.com (146.61.220.107+9494)
Status : running
Last Restart : Jan 05 09:56:48 CST

Make sure the Status line says running.

15. If the Status line does not say running after approximately one minute, contact Clark Carradine at 214-875-2443