The following are the AIX Systems Management Interface Tool screens associated with the setup and configuration of MQSeries in an HACMP environment. These instructions assume there is a volume group called "<Machine Identifier>datavg" which exists on a shared external disk array. The "<Machine Identifier>" portion of the volume group name is a string of characters which uniquely identifies the machine with which the volume group is normally associated. As an example, this document describes a two machine, mutual failover cluster using machine names of "mxdaaeai01" and "mxdaaeai02".
The volume group, logical volume and file system naming standards used in this document conform to the standardized methodology detailed in the document titled "Filesystem Naming".
$ smit hacmp
--> Cluster Configuration
--> Cluster Topology
--> Configure Cluster
--> Change / Show Cluster Definition
Change / Show Cluster Definition
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
**NOTE: Cluster Manager MUST BE RESTARTED
in order for changes to be acknowledged.**
* Cluster ID [11870312] #
* Cluster Name [eai00]
$ smit hacmp
--> Cluster Configuration
--> Cluster Topology
--> Configure Nodes
--> mxdaaeai01
Change/Show a Cluster Node
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
* Node Name mxdaaeai01
* New Node Name []
$ smit hacmp
--> Cluster Configuration
--> Cluster Topology
--> Configure Nodes
--> mxdaaeai02
Change/Show a Cluster Node
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
* Node Name mxdaaeai02
* New Node Name []
$ smit hacmp
--> Cluster Configuration
--> Cluster Topology
--> Configure Adapters
--> Change / Show an Adapter
--> mxdaaeai01
Change/Show an Adapter
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
* Adapter IP Label mxdaaeai01
New Adapter Label []
Network Type [ether] +
Network Name [ether] +
Network Attribute public +
Adapter Function service +
Adapter Identifier [10.4.192.38]
Adapter Hardware Address []
Node Name [mxdaaeai01] +
$ smit hacmp
--> Cluster Configuration
--> Cluster Topology
--> Configure Adapters
--> Change / Show an Adapter
--> mxdaaeai01boot
Change/Show an Adapter
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
* Adapter IP Label mxdaaeai01boot
New Adapter Label []
Network Type [ether] +
Network Name [ether] +
Network Attribute public +
Adapter Function boot +
Adapter Identifier [10.4.192.36]
Adapter Hardware Address []
Node Name [mxdaaeai01] +
$ smit hacmp
--> Cluster Configuration
--> Cluster Topology
--> Configure Adapters
--> Change / Show an Adapter
--> mxdaaeai01by
Change/Show an Adapter
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
* Adapter IP Label mxdaaeai01by
New Adapter Label []
Network Type [ether] +
Network Name [ether] +
Network Attribute public +
Adapter Function standby +
Adapter Identifier [10.4.194.36]
Adapter Hardware Address []
Node Name [mxdaaeai01] +
$ smit hacmp
--> Cluster Configuration
--> Cluster Topology
--> Configure Adapters
--> Change / Show an Adapter
--> mxdaaeai01tty
Change/Show an Adapter
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
* Adapter IP Label mxdaaeai01tty
New Adapter Label []
Network Type [rs232] +
Network Name [serial1] +
Network Attribute serial +
Adapter Function service +
Adapter Identifier [/dev/tty3]
Adapter Hardware Address []
Node Name [mxdaaeai01] +
$ smit hacmp
--> Cluster Configuration
--> Cluster Topology
--> Configure Adapters
--> Change / Show an Adapter
--> mxdaaeai02
Change/Show an Adapter
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
* Adapter IP Label mxdaaeai02
New Adapter Label []
Network Type [ether] +
Network Name [ether] +
Network Attribute public +
Adapter Function service +
Adapter Identifier [10.4.192.39]
Adapter Hardware Address []
Node Name [mxdaaeai02] +
$ smit hacmp
--> Cluster Configuration
--> Cluster Topology
--> Configure Adapters
--> Change / Show an Adapter
--> mxdaaeai02boot
Change/Show an Adapter
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
* Adapter IP Label mxdaaeai02boot
New Adapter Label []
Network Type [ether] +
Network Name [ether] +
Network Attribute public +
Adapter Function boot +
Adapter Identifier [10.4.192.37]
Adapter Hardware Address []
Node Name [mxdaaeai02] +
$ smit hacmp
--> Cluster Configuration
--> Cluster Topology
--> Configure Adapters
--> Change / Show an Adapter
--> mxdaaeai02by
Change/Show an Adapter
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
* Adapter IP Label mxdaaeai02by
New Adapter Label []
Network Type [ether] +
Network Name [ether] +
Network Attribute public +
Adapter Function standby +
Adapter Identifier [10.4.194.37]
Adapter Hardware Address []
Node Name [mxdaaeai02] +
$ smit hacmp
--> Cluster Configuration
--> Cluster Topology
--> Configure Adapters
--> Change / Show an Adapter
--> mxdaaeai02tty
Change/Show an Adapter
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
* Adapter IP Label mxdaaeai02tty
New Adapter Label []
Network Type [rs232] +
Network Name [serial1] +
Network Attribute serial +
Adapter Function service +
Adapter Identifier [/dev/tty3]
Adapter Hardware Address []
Node Name [mxdaaeai02] +
$ smit hacmp
--> Cluster Configuration
--> Cluster Security
--> Change / Show an Cluster Security
Change / Show Cluster Security
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[TOP] [Entry Fields]
* Cluster Security Mode Standard +
WARNING: The /.rhosts file must be removed
from ALL nodes in the cluster when the
security mode is set to 'Enhanced'.
Failure to remove this file makes it
possible for the authentication server
to become compromised. Once the server
has been compromised, all authentication
passwords must be changed.
Changes to the cluster security mode
setting alter the cluster topology
configuration, and therefore need to be
synchronized across cluster nodes. Since
cluster security mode changes are seen as
topology changes, they cannot be performed
along with dynamic cluster resource
reconfigurations.
[BOTTOM]
$ smit hacmp
--> Cluster Configuration
--> Cluster Resources
--> Define Resource Groups
--> Change / Show a Resource Group
--> eai00_1_rg1
Change/Show a Resource Group
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
Resource Group Name eai00_1_rg1
New Resource Group Name []
Node Relationship cascading +
Participating Node Names [mxdaaeai01 mxdaaeai02] +
$ smit hacmp
--> Cluster Configuration
--> Cluster Resources
--> Define Resource Groups
--> Change / Show a Resource Group
--> eai00_2_rg1
Change/Show a Resource Group
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
Resource Group Name eai00_2_rg1
New Resource Group Name []
Node Relationship cascading +
Participating Node Names [mxdaaeai02 mxdaaeai01] +
$ smit hacmp
--> Cluster Configuration
--> Cluster Resources
--> Define Application Servers
--> Change / Show an Application Server
--> mqseries1_app1
Change / Show an Application Server
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
Server Name mqseries1_app1
New Server Name [mqseries1_app1]
Start Script [/home/bin/mqseries1_start.ksh]
Stop Script [/home/bin/mqseries1_stop.ksh]
$ smit hacmp
--> Cluster Configuration
--> Cluster Resources
--> Define Application Servers
--> Change / Show an Application Server
--> mqseries2_app1
Change / Show an Application Server
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
Server Name mqseries2_app1
New Server Name [mqseries2_app1]
Start Script [/home/bin/mqseries2_start.ksh]
Stop Script [/home/bin/mqseries2_stop.ksh]
$ smit hacmp
--> Cluster Configuration
--> Cluster Resources
--> Change / Show Resources / Attributes for a Resource Group
--> eai00_1_rg1
Change/Show Resources/Attributes for a Resource Group
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[TOP] [Entry Fields]
Resource Group Name eai00_1_rg1
Node Relationship cascading
Participating Node Names mxdaaeai01 mxdaaeai02
Service IP label [mxdaaeai01] +
Filesystems [/mxdaaeai01/home /mxdaaeai01/ibm/mqm/P2EAIAIX/data /mxdaaeai01/ibm/mqm/P2EAIAIX/log /mxdaaeai01/ibm/mqm/XXEAIAIX/data /mxdaaeai01/ibm/mqm/XXEAIAIX/log /mxdaaeai01/mercator]
Filesystems Consistency Check fsck +
Filesystems Recovery Method sequential +
Filesystems/Directories to Export [] +
Filesystems/Directories to NFS mount [] +
Network For NFS Mount [] +
Volume Groups [eai01datavg] +
Concurrent Volume groups [] +
Raw Disk PVIDs [] +
Connections Services [] +
Fast Connect Services [] +
Application Servers [mqseries1_app1] +
Highly Available Communication Links [] +
Miscellaneous Data []
Inactive Takeover Activated false +
Cascading Without Fallback Enabled false +
9333 Disk Fencing Activated false +
SSA Disk Fencing Activated false +
Filesystems mounted before IP configured true +
[BOTTOM]
$ smit hacmp
--> Cluster Configuration
--> Cluster Resources
--> Change / Show Resources / Attributes for a Resource Group
--> eai00_2_rg1
Change/Show Resources/Attributes for a Resource Group
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[TOP] [Entry Fields]
Resource Group Name eai00_2_rg1
Node Relationship cascading
Participating Node Names mxdaaeai02 mxdaaeai01
Service IP label [mxdaaeai02] +
Filesystems [/mxdaaeai02/home /mxdaaeai02/ibm/mqm/YYEAIAIX/data /mxdaaeai02/ibm/mqm/YYEAIAIX/log /mxdaaeai02/mercator]
Filesystems Consistency Check fsck +
Filesystems Recovery Method sequential +
Filesystems/Directories to Export [] +
Filesystems/Directories to NFS mount [] +
Network For NFS Mount [] +
Volume Groups [eai02datavg] +
Concurrent Volume groups [] +
Raw Disk PVIDs [] +
Connections Services [] +
Fast Connect Services [] +
Application Servers [mqseries2_app1] +
Highly Available Communication Links [] +
Miscellaneous Data []
Inactive Takeover Activated false +
Cascading Without Fallback Enabled false +
9333 Disk Fencing Activated false +
SSA Disk Fencing Activated false +
Filesystems mounted before IP configured true +
[BOTTOM]
$ smit hacmp
--> Cluster Configuration
--> Cluster Resources
--> Change / Show Run Time Parameters
--> mxdaaeai01
Change/Show Run Time Parameters
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
Node Name mxdaaeai01
Debug Level high +
Host uses NIS or Name Server true +
$ smit hacmp
--> Cluster Configuration
--> Cluster Resources
--> Change / Show Run Time Parameters
--> mxdaaeai02
Change/Show Run Time Parameters
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
Node Name mxdaaeai02
Debug Level high +
Host uses NIS or Name Server true +
$ smit hacmp
--> Cluster Configuration
--> Cluster Resources
--> Change / Show Cluster Lock Manager Resource Allocation
Change/Show Cluster Lock Manager Resource Allocation
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
* Lock Tuning Statistic Recalculation Rate [9999999] +#
* Lock Tuning Statistic Decay Rate [0.875] +
$ smit hacmp
--> Cluster Configuration
--> Cluster Resources
--> Show Cluster Resources
--> Show Resource Information by Node
--> mxdaaeai01
COMMAND STATUS
Command: OK stdout: yes stderr: no
Before command completion, additional instructions may appear below.
[TOP]
Resource Group Name eai00_1_rg1
Node Relationship cascading
Participating Node Name(s) mxdaaeai01 mxdaaeai02
Service IP Label mxdaaeai01
Filesystems /mxdaaeai01/home /mxdaaeai01/ibm/mqm/P2EAIAIX/DATA /mxdaaeai01/ibm/mqm/P2EAIAIX/log /mxdaaeai01/ibm/mqm/XXEAIAIX/data /mxdaaeai01/ibm/mqm/XXEAIAIX/log /mxdaaeai01/mercator
Filesystems Consistency Check fsck
Filesystems Recovery Method sequential
Filesystems/Directories to be exported
Filesystems to be NFS mounted
Network For NFS Mount
Volume Groups eai01datavg
Concurrent Volume Groups
Disks
Shared Tape Resources
Connections Services
Fast Connect Services
Application Servers mqseries1_app1
Highly Available Communication Links
Miscellaneous Data
Inactive Takeover false
Cascading Without Fallback false
9333 Disk Fencing false
SSA Disk Fencing false
Filesystems mounted before IP configured true
Run Time Parameters:
Resource Group Name eai00_2_rg1
Node Relationship cascading
Participating Node Name(s) mxdaaeai02 mxdaaeai01
Service IP Label mxdaaeai02
Filesystems /mxdaaeai02/home /mxdaaeai02/ibm/mqm/YYEAIAIX/data /mxdaaeai02/ibm/mqm/YYEAIAIX/log /mxdaaeai02/mercator
Filesystems Consistency Check fsck
Filesystems Recovery Method sequential
Filesystems/Directories to be exported
Filesystems to be NFS mounted
Network For NFS Mount
Volume Groups eai02datavg
Concurrent Volume Groups
Disks
Shared Tape Resources
Connections Services
Fast Connect Services
Application Servers mqseries2_app1
Highly Available Communication Links
Miscellaneous Data
Inactive Takeover false
Cascading Without Fallback false
9333 Disk Fencing false
SSA Disk Fencing false
Filesystems mounted before IP configured true
Run Time Parameters:
Node Name mxdaaeai01
Debug Level high
Host uses NIS or Name Server true
[BOTTOM]
$ smit hacmp
--> Cluster Configuration
--> Cluster Resources
--> Cluster Events
--> Show Cluster Resources
--> Show Resource Information by Node
--> mxdaaeai02
COMMAND STATUS
Command: OK stdout: yes stderr: no
Before command completion, additional instructions may appear below.
[TOP]
Resource Group Name eai00_1_rg1
Node Relationship cascading
Participating Node Name(s) mxdaaeai01 mxdaaeai02
Service IP Label mxdaaeai01
Filesystems /mxdaaeai01/home /mxdaaeai01/ibm/mqm/P2EAIAIX/data /mxdaaeai01/ibm/mqm/P2EAIAIX/log /mxdaaeai01/ibm/mqm/XXEAIAIX/data /mxdaae
ai01/ibm/mqm/XXEAIAIX/log /mxdaaeai01/mercator
Filesystems Consistency Check fsck
Filesystems Recovery Method sequential
Filesystems/Directories to be exported
Filesystems to be NFS mounted
Network For NFS Mount
Volume Groups eai01datavg
Concurrent Volume Groups
Disks
Shared Tape Resources
Connections Services
Fast Connect Services
Application Servers mqseries1_app1
Highly Available Communication Links
Miscellaneous Data
Inactive Takeover false
Cascading Without Fallback false
9333 Disk Fencing false
SSA Disk Fencing false
Filesystems mounted before IP configured true
Resource Group Name eai00_2_rg1
Node Relationship cascading
Participating Node Name(s) mxdaaeai02 mxdaaeai01
Service IP Label mxdaaeai02
Filesystems /mxdaaeai02/home /mxdaaeai02/ibm/mqm/YYEAIAIX/data /mxdaaeai02/ibm/mqm/YYEAIAIX/log /mxdaaeai02/mercator
Filesystems Consistency Check fsck
Filesystems Recovery Method sequential
Filesystems/Directories to be exported
Filesystems to be NFS mounted
Network For NFS Mount
Volume Groups eai02datavg
Concurrent Volume Groups
Disks
Shared Tape Resources
Connections Services
Fast Connect Services
Application Servers mqseries2_app1
Highly Available Communication Links
Miscellaneous Data
Inactive Takeover false
Cascading Without Fallback false
9333 Disk Fencing false
SSA Disk Fencing false
Filesystems mounted before IP configured true
Run Time Parameters:
Node Name mxdaaeai02
Debug Level high
Host uses NIS or Name Server true
[BOTTOM]