|
|
|
Instructions
on Forcing a Dump on a S85/7017 After a System Hang
Operator
Panel and Power Control The above diagram shows the locations of the
operator panel display and the operator panel.
1
Operator Panel Display
2
Scroll Up Pushbutton
3
Scroll Down Pushbutton
4
Enter Pushbutton
5
Attention LED
6
Power On LED
7
Serial Number
8
Power Pushbutton
To
force a dump from the Operator Panel on the S85, use the following
procedure.
Using
the Scroll Up or Down Button, Select function 22 onthe operator
panel and press Enter. The response A1003022 displays on the
operator panel.
Using
the Scroll Up or Down Button, Select function 22 again and press
Enter. The response D1823080 displays on the operator panel. This
indicated the dump request has been accepted by AIX, and the process
continues, displaying 4-character progress messages.
When
the dump is complete the system automatically powers off. At this
point you will need to Push the Power Pushbutton to start the
system. Note:
the system administrator may be able to start the system from the
remote console at this point. Contact the System Administrator to
ascertain whether pushing the power button is necessary.
|
|
|
